read me:

There is NEW material in the goodies box for you to download. Some of it you've had printouts for, other stuff is completely new...and may be useful.
ALSO - check the ASSESSMENTS link above from Monday night onwards for the details about your second assessment.

Good luck =]
THE WALL:

New GBT Charging Interface Is Exposed, CHADEMO Develops New Standards with China

ZZPosted by Felix on Wednesday, November 18, 2026 , under | comments (0)



As it is reported by Electrek, on April 24, CHAdeMO Association and China Electricity Council have jointly released the new version of the CHAdeMO fast-charging standard-CHAdeMO 3.0.

 

The CHAdeMO 3.0 charger is smaller and its cable size will be reduced. It uses the same plug as the chademo gbt charging protocol, and also adopts liquid cooling technology to cool the charger.

 

The DC charging power of the vehicles using CHAdeMO 3.0 standard can exceed 500 KW (the maximum current is 600 A). The CHAdeMO 3.0 is also compatible with the previous CHAdeMO version, gbt to chademo, CCS and other fast-charging systems of different standards. In addition, the CHAdeMO standard also supports bidirectional charge and discharge from the beginning. This feature is not available in the current mainstream CCS fast charge standard.

 

Currently, China and Japan are cooperating on the new fast-charging standard, and India is also expected to become a new partner. According to CHAdeMO, South Korea and some other Southeast Asian countries have also shown strong interest in such charging technology.

 

The biggest difference between CHAdeMO and the current mainstream CCS standard is that the CHAdeMO standard is designed with a core function of two-way charging-discharge from the beginning, which can not only charge electric vehicles, but also recycle the power and sell it back to the grid.

 

Once China and Japan have reached an agreement on the fast-charging standard, CCS will lose its leading position.

 

It is said that the CHAdeMO 3.0 standard test requirements will be released within a year.

 

In the past, the CCS standard has always prevailed in the industry; however, with the release of the CHAdeMO 3.0 standard, the war of global fast-charging standard will start again. Though the CHAdeMO 3.0 charger is smaller, it is capable of charging up to 500 kW, thereby making itself very competitive.

 

In addition, as China, the largest consumer market for electric vehicles, will also adopt the CHAdeMO 3.0 standard, CCS may lose its leading position in the field of fast-charging standards.

 

As a trustworthy and reliable electric vehicle infrastructure companies, we provide you with ev type 2 charging cable.

 


Development of the SAE J1772 Standard of Electric Vehicle Charger

ZZPosted by Felix on , under | comments (0)



Table of Content [Hide]

1. 1. What the SAE JI772 standard is

2. 2. The development history of SAE JI772

1. What the SAE JI772 standard is

 

SAE J1772, also known as IEC Type 1 (IEC 62196 Type 1) or J plug, is the electrical connector standard for electric vehicles in North America. It is maintained by the International Society of Automotive Engineers. The official name is SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler. These include the physical characteristics, electronic characteristics, sae j1772 communication protocol and performance requirements of the electric vehicle conductive charging system and the vehicle-side coupler. Its purpose is to define a general electric vehicle conductive charging system architecture, including general requirements for vehicle sockets and mating connectors, performance requirements and size requirements.

 

2. The development history of SAE JI772

The main force driving the development of SAE J1772 is from the California Air Resources Board (CARB). In the past, electric vehicles (such as General Motors EV1) were charged by inductive couplers. But later it was not recommended, and started to promote conductive car charging. Then, the California Air Resources Board also formulated the SAE J1772-2001 standard in June 2001 as the standard for electric vehicle charging in California.

 

The 2001 CARB regulations mandated that from 2006 onwards, the J1772-2001 specification must be introduced into the production of electric vehicles. CARB proposed a draft amendment to Title 13 section 1962.2 in 2008, compelling cars to be marketed from 2010 to use the SAE J1772 standard proposed later, and this amendment was passed in 2012.

 

Many electric vehicle depots after 2000 adopted the SAE J1772-2009 standard, such as the third generation of Chevrolet Volanda and Nissan Leaf, as well as earlier models. This connector has become a standard device in the U.S. market, mainly because there are many charging stations with this type of connector in the U.S. electric vehicle network (U.S. Economic Recovery and Reinvestment Act has subsidies for programs like ChargePoint America, which also has some help).

 

The European version of the vehicle is also equipped with SAE J1772-2009 connectors, until European car manufacturers decide to use IEC Type 2 "Mennekes" connectors as standard connectors, and all IEC connectors use the same SAE J1772 communication protocol, so car manufacturers can follow the market needs, and vehicles with SAE J1772-2009 connectors or IEC Type 2 connectors are sold. There are also converters for these two types of connectors on the market.

 

As a professional ev charging equipment manufacturer, AG Electrical's products are developed in accordance with SAE J1772, GB/T20234, IEC 62196 and other mainstream standards, and can be applied to different brands of electric vehicles and charging stations. We are striving to provide you with the latest standard electric vehicle charging equipment.

 

For more information about sae j1772 pdf and sae j1772 charging adapter, please feel free to contact us!

 

As a trustworthy and reliable ev charger suppliers, we provide you with ev charging products.

 


Electric Car Charger Extension Cords

ZZPosted by Felix on , under | comments (0)



Table of Content [Hide]

1. 1. Understand electric car charger extension cords

2. 2. Precautions for use of ev extension cord

1. Understand electric car charger extension cords

 

Electric vehicle extension cord is the carrier connecting electric car and charging pile, its main function is to transmit electricity. With the development of charging technology, for better complete the charging process, communication between the electric vehicle and the charging pile is required, and automatic control is required when necessary. The safety of electric vehicles has become a major concern. Due to the long time, high current intensity and high frequency of charging cable, the safety of the charging and discharging process of electric vehicles should be attached great importance.  Therefore, The charging process puts forward higher requirements on the cable, charging cable not only needs to play the role of power transmission, but also needs to transfer the status and information of vehicle and power battery to the charging pile for real-time interaction, under necessary conditions, the charging action should be controlled so that the charging process can be completed safely and reliably.

 

2. Precautions for use of electric car charging extension cord

If it is an ordinary electric vehicle, the charger current is generally around 15A, so the output end of the charger can use 16 meters and 4 square meters of electric vehicle charging extension cord for charging electric car. But pay attention, on the basis of ensuring good insulation performance, the electric vehicle charging extension cord for electric car charger should have high heat resistance and aging resistance, and at the same time, it should have good low smoke flame retardant characteristics during combustion, so as to ensure that the loss and damage will be minimized in case of accidents.

 

It is recommended to charge the battery every day, so that the battery is in a shallow cycle, the life of the battery will be extended. In the process of using EV charging extension cord for electric car, the charging time and frequency should be accurately grasped according to the actual situation. Overcharge, over-discharge, and undercharge would shorten battery life.

 

As a professional manufacturer of electric vehicle charging equipment, AG Electrical reminds you that you need to use the correct way of electric vehicle maintenance.

 

As a trustworthy and reliable ev charger manufacturers, we provide you with ev charging products.

 


Related Posts with Thumbnails