Our GBT EV Charging Components can meet the needs of different customers in different areas to the maximum extent. For example, AG ELECTRICAL can provide open-end GBT electric vehicle charging cable types that can meet the needs of EV charging companies and requirements from retailers as they have a different market target.

"American Standard" refers to the SAE chademo J1772 standard. SAE J1772 is just a general term. It includes four subdivision standards and three different charging interface models. Among them, the AC charging standard and the DC charging standard are divided into level 1 and level 2 specifications, which are mainly different in output power.

Charge coupler compliant USA SAE J1772™ specifications

Design for AC Level 2 charging standard and backward compatible of AC Level 1, 120V, and 16A.

Onitl Cable Technology Corporates its charging cable business for AG ELECTRICAL EV charging systems globally to offer various products that meet customers' needs. AG ELECTRICAL has the capabilities to provide high-quality EV car charging cable/car charging connectors and ideal custom solutions whether you are planning for an EV charging solutions.

SAE J1772 EV Charging Product List

SAE Type 1 Charging Cable

SAE Type 1 Charging Cable is able to install in no matter indoor or outdoor according to actual demand. Firmly locking the charger on the installation backplane can prevent theft.

SAE EV J1772 charge port Type 1 Mode 2

Special inner water-resistant safety performance, protection grade performed IP55 (working condition). The shell can correctly insulate water from physique and beautify the protection degree even in horrific climate or one of a kind circumstances.

EV Charging Adapter TYPE1 TO GBT

EV J1772 holster TYPE1 TO GBT cable acquires all safety and production certificates

SAE EV Charging Socket

Conform to the provisions and necessities of SAE J1772-2012 Socket, It can be used to all American preferred electric powered car charging guns.

SAE Dummy Socket

The major function of SAE Dummy socket is to organize type 1 connectors and cables in a limited space. It will facilitate 5m, 8m even longer cable organizing.

SAE J1772 AC LEVEL1 & AC LEVEL2

SAE J1772 Type1 Connectors

The SAE 1772 Type1 connector/inlet pair is broadly used in the U.S and Japan as the U.S. and Japan do not have three phase power grid. This standard is limited to single-phase and lower power output than Type 2. It also notes that for Type 1, most of the charging cable is permanently fixed to the charging station/pile.

AG ELECTRICAL, as a participant of EV Industry, would like to be the pioneer of EV industry to make the earth a better planet for human beings.

AG ELECTRICAL EV Charging Cable Type1 conforms to SAE J1772

AG ELECTRICAL With the help of experienced cable specialist from Onitl Cable Technology Corp, AG ELECTRICAL has strong confidence on the product line of EV Connectors for type1 EV Charging Cable from quality perspective.

We have received continuous positive feedback of TYPE1 EV Charging Cable from our customers. With the vision to future, we would like to be the pioneer of EV industry to make the earth a better planet for humanbeings.

 Our GBT EV Charging Components can meet the needs of different customers in different areas to the maximum extent. For example, AG ELECTRICAL can provide open-end GBT electric vehicle charging cable types that can meet the needs of EV charging companies and requirements from retailers as they have a different market target.

Mechanical properties

Mechanical life: no-load plug>10000times

Impact of external force: can afford 1m drop and 2t vehicle run over pressure.

Electrical Performance

The rated current: 16A、32A

The rated voltage: 250V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature rise:<50K

Withstand voltage: 2000V

Contact impedance: 0.5mΩMax

Applied Materials

Shell Material: thermoplastics, flame retardant grade UL94-V0

Pin: Copper alloy, silver

Environmental performance

Operating temperature: -30C-+50C

TYPE2-TYPE2 Spiral Charging Mode3 Features

l Conform to the provisions and requirements of 62196-2 IEC 2010 SHEET-le.

l The product assembly conforms to IEC 61851-1 2010 charging mode 3 connection mode B2.

l Adopt no screw riveting pressure process，beautiful appearance. Hand-held design conforms to the principle of ergonomics, convenient plug and pull.

l Reliable materials, flame retardant, pressure resistance, abrasion resistance, impact resistance, high oil resistance.

l Excellent protection performance, IP55 protection level of the plug (working state) high security.

TYPE 1 to TYPE 2 EV charging cable Mode3 Parameter

AG ELECTRICAL can provide TYPE 2 to j1772 adapter adapter, TYPE 1 to TYPE 2 EV cable, TYPE 1 TYPE 2 cable, etc. Call us if you want to know more information.

 Our GBT EV Charging Components can meet the needs of different customers in different areas to the maximum extent. For example, AG ELECTRICAL can provide open-end GBT electric vehicle charging cable types that can meet the needs of EV charging companies and requirements from retailers as they have a different market target.

TYPE 2 to TYPE 2 Charging Cable Mode3  

l Conform to the provisions and requirements of 62196-2 IEC 2010 SHEET 2-lle.

l Product assembly conforms to IEC 61851-1-2010 charging mode 3 connection mode B2.

l Adopt no screw riveting pressing process, beautiful appearance. Hand-held design in line with ergonomic principles, convenient plug.

l Reliable materials, flame retardant, pressure resistance, abrasion resistance, impact resistance and oil resistance.

l Excellent protection performance, IP55 protection level of the plug (working state) high security.

 Our GBT EV Charging Components can meet the needs of different customers in different areas to the maximum extent. For example, AG ELECTRICAL can provide open-end GBT electric vehicle charging cable types that can meet the needs of EV charging companies and requirements from retailers as they have a different market target.

Mechanical properties

Mechanical life: no-load plug>10000times

Impact of external force: can afford 1m drop and 2t vehicle run over pressure.

Electrical Performance

The rated current: 16A、32A

The rated voltage: 250V/415V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature rise:<50K

Withstand voltage: 2000V

Contact impedance: 0.5mΩMax

Applied Materials

Shell Material: thermoplastics, flame retardant grade UL94-V0

Pin: Copper alloy, silver

Environmental performance

Operating temperature: -30C-+50C

EV TYPE 2 to TYPE 1 Adapter Charging Mode3 Features

l Conform to the provisions and requirements of 62196-2 IEC 2010 SHEET 2-lle.

l The product assembly conforms to IEC 61851-1 2010 charging mode 3 connection mode B2.

l Adopt no screw rveting pressure process, beautiful appearance. Hand-held design conforms to the principle of ergonomics, convenient plug and pull.

l Reliable materials, flame retardant, pressure resistance, abrasion resistance, impact resistance, high oil resistance.

l Excellent protection performance, IP65 protection level of the plug (working state) high security.

TYPE 2 to TYPE 1 Charging Cable Adaptor Mode3 Parameter

 AG ELECTRICAL is one of the top electric vehicle charging equipment manufacturers, our GBT EV Charging products are sold to many countries all over the world.

Type 2 socket 32a 

Mechanical Properties

Mechanical life: no-load plug>10000

Insertion force:<100N    

Electrical Performance

The rated current: 16A,32A,40A

The rated voltage: 250V,440V

Insulation resistance: >1000MΩ(DC500V)  

Pins temperature rise:<50K

Withstand voltage: 2000V

Contact impedance: 0.5mΩMax

Applied Materials

Shell material: thermoplastics, flame retardant grade UL94V-0

Contact-tube: Copper alloy, silver plating

Seal:Rubber, Silicone

Environmental Performance

Operating temperature: -30℃~+50℃

Waterproof rate: IP55   

Type 2 Charging Socket Features

l Conform to the provisions and requirements of IEC 62196 type 2 socket-2 2016.

l Match with Hela locking device.

l Have one or two PTC (PT1000) thermistor (can match with NTC or Temperature control switch).

l Beautiful appearance, prevention cap can be installed on the left side, the right side or the front of it.

l Reliable material, flame retardant, pressure proof, wear-resisting, vimpact resistance, high oil proof.

l Excellent protection performance, protection grade achieved IP55 (working condition) .

Type 2 socket EV Applies to Vehicle

For Tesla model3, for Tesla Model S, for Tesla Model X, for BAIC EU-Series, for BYD Yuan/S2 EV, for BYD e5, for Chevrolet Volt, for Mia, for Mia Electric Van, for Mitsubishi OUTLANDER PHEV, for Nissan NV200 SE Van, for Nissan leaf, for SAIC Baojun E-Series, for SAIC Roewe Ei5 EV, for BMW 530e/Le, for Renault Zoe, for Hyundai Kona EV, for BMW i3, for BYD Tang PHEV, for Chery eQ EV, for Toyota Prius PHEV, for Volkswagen e-Golf, for Geely Emgrand EV, for Great Wall Ora R1 EV

IEC 62196-2 Type 2 EV Charging Socket Parameter

 AG ELECTRICAL is one of the top electric vehicle charging equipment manufacturers, our GBT EV Charging products are sold to many countries all over the world.

Mechanical Properties

Mechanical life: no-load plug>10000times

Impact of external force: be able to afford 1m drop and 2tons vehicle run over pressure

Insertion and extraction force:<100N

Electrical Performance

Rated current: 16A/20A/32A

Rated voltage: 120V/250V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature rise:<50K

Withstand voltage: 2500V

Contact impedance: 0.5mΩMax

Raw Material

Shell material: thermoplastics, flame retardant grade UL94-0

Plug pin:copper alloy, silver-plate

Environmental Performance

Temperature: -30℃~+50℃

SAE Type 1 Charging Cable Features  

l Conform to the provisions and requirements of SAE J1772 type 1 Standard-2012, it can charge all EV manufactured in the USA, correctly and effectively with high compatibility.

l Using a riveting pressure process with none screw with beautiful appearance. Hand-held design conforms to ergonomic principle, plug conveniently. The head of pins using insulation design to prevent direct contact with the hand. The customer is able to install the J1772 charging cable indoors or outdoor, according to actual demand. Firmly locking the charger on the installation backplane can prevent theft.

l XLPO for J1772 extension cable insulation prolonging the aging resistance life-span. TPU sheath improves the bending life and wears resistance of the SAE J1772 cable. The best material in the market at present conforms to the latest European Union standards.

l Special internal waterproof protection performance, protection grade achieved IP55 (working condition). The shell can effectively insulate the water from the body and enhance the safety level even in bad weather or special circumstances.

l Adopted double color coating technology, custom color accepted (the regular color orange, blue, green, gray, white)

l Keep the laser logo space for customers. Provide OEM/ODM service to help customers expand the market easier.

Application of SAE Type 1 Charging Cable Features

Apply to Vehicle

Tesla model3, Tesla Model S, Tesla Model X, BAIC EU-Series, BYD Yuan/S2 EV, BYD e5, Chevrolet Volt, Mia, Mia Electric Van, Mitsubishi OUTLANDER PHEV, Nissan NV200 SE Van, Nissan leaf, SAIC Baojun E-Series, SAIC Roewe Ei5 EV, BMW 530e/Le, Renault Zoe, Hyundai Kona EV, BMW i3, BYD Tang PHEV, Chery eQ EV, Toyota Prius PHEV, Volkswagen e-Golf, Geely Emgrand EV, Great Wall Ora R1 EV

Application in area

Commercial EV Charging/Workplace EV Charging, Hotels EV Charging, Home/Residential EV Charging, Public EV charging

SAE Type 1 Charging Cable Features Parameter

AG ELECTRICAL EV Charging cable Type2 acquires all safety and production certificates in electrical filed, ISO9001, ISO 14001, OHSAS 18001, SAE J1772-2012

We offer J1772 connector for sale, if you are interested in J1772 replacement connector, please contact us.