GBT ev charge plug types

GB/T EV Charging Cable

GB/T EV Charging Cable conform to the provisions and requirements of GB/T20234.2-2015, it can charge all EV manufactured in china, correctly and effectively with high compatibility.

GB/T Vehicle to Load(V2L)

"Vehicle-To-Load" (V2L) refers to using the stored energy from electric vehicles high-voltage to recharge any other electric device. With the popularization of V2L technology, AG has developed this safe and efficient V2L product in combination with market changes to serve consumers all over the world.

GB/T Portable ev ac charger

GB/T Portable Ev Charger conform to the provisions and requirements of GB/T20234.2-2015,  GB/T 18487.1-2015. And it can charge all EV manufactured in china. Customer is capable to deploy the charger indoor or outdoor, according to genuine demand. Firmly locking the charger on the setup backplane can prevent theft.

GB/T EV DC Charging Socket

GB/T EV DC Charging Socket has beautiful appearance, and the prevention cap can be installed on the left side, the right side or the front of it.

GB/T-GB/T Charging Mode3 Cable

GB/T-GB/T Charging Mode3 Cable has excellent protection performance, protection grade achieved IP55 of plug (working condition) High security.

GB/T EV DC Charging Cable

Developed for portable DC charging pile, beautiful appearance with hand - held design and small in volume make installation easily, insertion and withdrawal conveniently.

GB/T EV DC TPU Charging Cable

GB/T EV DC TPU Charging Cable equipped with TPU sheath. It gives a better performance in a cold and low temperature environment.

GB/T EV AC Charging Socket

GB/T EV AC Charging Socket use reliable material, flame retardant, pressure proof, wear-resisting, impact resistance, high oil proof.

GB/T EV Charging-FAQs

What does the EV Charging Standard Mean?

At present, the EV charging interface standards are not untied throughout the world, and they are roughly divided into three categories: one is the American standard, one is the European standard, and the other is the China standard. According to the latest mainstream GB/T EV charging technology, DC charging (DC) standard and AC charging (AC) standard are popular ones all over the world.

What are the Function of Solenoid Locks?

The solenoid lock is used to fix the socket and anti-theft.

What's the Difference between AC and DC?

Ac and DC EV charging interface is different. Dc power supply is larger, and has faster charging speed. It can save time, and is suitable for short stay destination users. However, the power of ac charging is smaller, which is suitable for occasions where the charging time is not sensitive such as home EV charging or Hotel EV charging.

Do the GB/T EV Charging Products Meet the Standards?

The products of the national standard are in line with the provisions and requirements of GB/T 20234.2-2015 connection device for conductive charging of electric vehicles. Besides GB/T, AG ELECTRICAL also has a variety range of charging interfaces and charging methods that conform to IEC and SAE standards. They are applicable for different brands of electric vehicles and charging stations.

What are the Advantages in Materials?

AG ELECTRICAL use reliable materials with test of flame retardant, pressure resistance, abrasion resistance, impact resistance, high oil resistance. Safety insulation design is adopted to prevent accidental contact with human hands. The cable insulation adopts XLPO to prolong the aging life, and the sheath adopts TPU to improve the bending life of the cable.

What is a GB/T EV charger?

A GB/T EV charger is an electric vehicle charging station designed and manufactured by GB/T Technologies Inc. It is a level 2 charging station that can provide up to 7.2 kW of power to charge electric vehicles.

How long does it take to charge an electric vehicle with a GB/T EV charger?

The charging time for an electric vehicle with a GB/T EV charger depends on the battery size of your vehicle and the power output of the charging station. On average, it takes about 4-6 hours to fully charge an electric vehicle using a GB/T EV charger.

Are GB/T EV chargers compatible with all electric vehicles?

GB/T EV chargers are compatible with all electric vehicles that use a standard J1772 charging port. However, some electric vehicles may require an adapter to use with the GB/T EV charger.

There are many ev charging suppliers, but we are one of the best choices for you.

For more information about electric vehicle plug types, please feel free to contact us!

 DC charging allows the car to be charged significantly faster than AC charging. Currently, the most common charging stations are 50 kWh, but 150 kWh stations already appear, and 270 kWh and 350 kWh chargers are emerging, which is reflected in the constant need to develop more efficient connectors.

CCS - Type 1 and Type 2 (Combined Charging System)

CCS, or combined charging system, is a beautifully elegant solution for fast DC charging. These are the original plugs, either type 1 electric car charger or Type 2, to which two more pins are added at the bottom. In the case of DC charging, these two lower pins participate in the charging itself and from the upper part only the communication pin and the earth conductor, which provides the reference point for the protection systems, are used. These connectors can withstand power of up to 350 kW.

It is currently the most popular ev charge connector types. Type 1 is common in the United States, while Type 2 CCS is used in Europe. The European Parliament's efforts to allow only CCS 2 and other plugs to be phased out of Europe have not been successful, but this standard is still winning, mainly because the car has only one socket. When using the CHAdeMO connector, the car must always have two sockets.

CCS are not compatible with CHAdeMO and GB / T charging stations because they use different communication protocolsa, so special adapters are needed and they are not easy to obtain.

As a reliable car charger ev ltd, we provide electric car socket, adapter for electric car charger, type 2 ev cable and etc. Contact us to know car charging cable types or different ev charging plugs.

 AG ELECTRICAL is proud to be the leading Factory Supplier in China in EV Industry. We can satisfy customers' variety of demands with AG FAST RESPONSE, AG FLEXIBILITY, and AG RELIABILITY.

That means "Customer First" is the core value in our pre-sales and after-sales process. AG ELECTRICAL respects any customers and looking for long term world-wide partnership.  

AG ELECTRICAL EV Charging products make everything easier for customer to use.

Special internal waterproof treatment and TPU cable material, conforming to the latest IEC standards, lighter and thinner, longer durability, low temperature resistance, can give customers a better usage experience.

IEC 62196-2 EV ChargingIEC 62196-2 EV Charging

IEC 62196-2 (Type 2) products is more and more popular in Europe. AG Electrical has researched and developed IEC 62196 TYPE 2 series products (type2 16A / 32A AC) according to the market demand. We can offer personalized service for different customers.

AG Electrical IEC 62196 TYPE 2 is compatible with European Standard (IEC 62196-1. IEC 62196-2 TYPE2) charging pile, electric vehicles and charging stations with AG FLEXIBILITY.

ODM/OEM is accepted as AG ELECTRICAL is professional with strong technique support. We have various ev charging socket on sale.

We have received continuous positive feedback from our clients since AG ELECTRICAL delivered products to the European Market. "No compromise on quality" is always the quote for every AG team members. Our electric vehicle charging socket and cables are all with premium quality.

AG ELECTRICAL is one of the top electric vehicle charging companies, our GBT EV Charging products are sold to many countries all over the world. Our GBT EV Charging Components can meet the needs of different customers in different areas to the maximum extent. For example,  AG ELECTRICAL can provide open-end GBT electric vehicle charging cable types that can meet the needs of ev charging solutions ltd and requirements from retailers as they have a different market target.

SAE J1772 describes the physical and electrical characteristics of the connector and vehicle input interface in detail for most American customers. This standard allows vehicles to be charged at 120 and 240V using connectors of standard size and function, which not only facilitates consumers, but also relieves a variety of troubles. SAE J1772 components developed by AG ElECTRICAL are now available to all customers.

As one of the most reliable top ev charger manufacturers, we provide adapter for electric car charger, ev cord, electric vehicle charging cord, electric vehicle charging adapter, ev type 2 charging cable and etc. Contact us to know more about ev charging socket types.

 1. Understand electric vehicle extension cord

Electric car charger extension cord is the carrier connecting electric car and charging pile, its main function is to transmit electricity. With the development of charging technology, for better complete the charging process, communication between the electric vehicle and the charging pile is required, and automatic control is required when necessary. The safety of electric vehicles has become a major concern. Due to the long time, high current intensity and high frequency of charging cable, the safety of the charging and discharging process of electric vehicles should be attached great importance.  Therefore, The charging process puts forward higher requirements on the cable, charging cable not only needs to play the role of power transmission, but also needs to transfer the status and information of vehicle and power battery to the charging pile for real-time interaction, under necessary conditions, the charging action should be controlled so that the charging process can be completed safely and reliably.

2. Precautions for use of electric vehicle charging extension cord

If it is an ordinary electric vehicle, the charger current is generally around 15A, so the output end of the charger can use 16 meters and 4 square meters of electric vehicle charging extension cord. But pay attention, on the basis of ensuring good insulation performance, the extension cord for charging electric car should have high heat resistance and aging resistance, and at the same time, it should have good low smoke flame retardant characteristics during combustion, so as to ensure that the loss and damage will be minimized in case of accidents.

It is recommended to charge the battery every day, so that the battery is in a shallow cycle, the life of the battery will be extended. In the process of using electric car charging extension cord, the charging time and frequency should be accurately grasped according to the actual situation. Overcharge, over-discharge, and undercharge would shorten battery life.

As a professional manufacturer of electric vehicle charging equipment, AG Electrical reminds you that you need to use the correct way of electric vehicle maintenance.

For more information about ev charging cable types and type 2 charging cable, please feel free to contact us!

 As the main component of telex, EV cable is the carrier of power signal transmission, which plays a huge role in the charging process of electric vehicles. EV cables can be mainly divided into cable materials for charging pile stations and high-voltage cables in vehicles.

1. Main requirements for EV cables for new energy vehicles

EV cable is the main component of telex, which is mainly divided into charging pile/station cable materials and in-car high-voltage cable materials. Due to the high voltage, high current and harsh environment of use, the industry has put forward very high safety specifications and use requirements for cable materials.

2. Eight materials and standards commonly used in EV cables

At present, the eight materials commonly used in EV cables are XLPE, TPE, TPV, TPU, EPR, PVC/HNBR, silicone, and CPE/CR.

(1) Application of XLPE in EV cables

XLPE is mainly used for high-voltage cables in the car. The temperature resistance is good enough to burn red with an electric soldering iron, and it will remain on it for 10-20 seconds without damage. In 2017, the high-voltage cable in the car is mainly made of XLPE. Its standards in different application fields are as follows:

High voltage cable: ISO 6722, QC/T 1073, CQC1122/ DECRAK179 Charging cable: CQC1103 -1105, DECRA K175

(2) Application of TPE in EV cables

Compared with other cable materials, TPE has the advantages of adjustable softness, good touch, small specific gravity and high cost performance. Its standards in different application fields are as follows:

High voltage cable ISO 6722, QC/T 1073, CQC1122/ DECRA K179  Charging cable CQC1103 -1105, DECRA K175 EN50620, UL62

(3) Application of TPU in EV cables

TPU is mainly used in Europe, and some large cable factories in southern and central China want to develop TPU materials. Its standards in different application fields are as follows:

Charging cable CQC1103 -1105, DECRA, K175 EN50620, UL62

(4) Application of EPR in EV cables

EPR is used more in Europe, and is generally used in the core wire of charging piles. Its standards in different application fields are as follows:

High voltage cable ISO 6722, QC/T 1073, CQC1122/ DECRA K179 Charging cable CQC1103 -1105, DECRAK175, EN50620, UL62

(5) Application of silica gel in EV cables

Silicone has excellent heat resistance properties, up to 200 degrees. It also has a softness of 60-85A. Its standards in different application fields are as follows:

ISO 6722, QC/T 1073, CQC1122/ DECRA K179

(6) Application of PVC/HNBR in EV cables

This material is currently the most used in China because of its excellent feel and softness. However, due to the halogen content, environmental protection issues need to be resolved in the future. Its standards in different application fields are as follows:

Charging cable: CQC1103 -1105, DECRAK175, UL62

(7) Application of CPE/CR in EV cables

Compared with other cable materials, CPE/CR has better oil resistance and crack resistance. Its standards in different application fields are as follows:

Charging cable: CQC1103/CJS4522

(8) Application of TPV in EV cables

TPV appears less in the market, because the processing temperature is high, more than 200 degrees, if there is no suitable color masterbatch, it is easy to change color.

Its standards in different application fields are as follows:

Charging cable: CQC1103

As a reliable ev cables ltd, we provide public charging cable, ev charging cord, ev type 2 charging cable, ev charging products and etc. Contact us to know more.

1. What the SAE JI772 standard is

SAE J1772, also known as IEC Type 1 (IEC 62196 Type 1) or J plug, is the electrical connector standard for electric vehicles in North America. It is maintained by the International Society of Automotive Engineers. The official name is SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler. These include the physical characteristics, electronic characteristics, communication protocols and performance requirements of the electric vehicle conductive charging system and the vehicle-side coupler. Its purpose is to define a general electric vehicle conductive charging system architecture, including general requirements for vehicle sockets and mating connectors, performance requirements and size requirements.

2. The development history of SAE JI772

The main force driving the development of chademo j1772 is from the California Air Resources Board (CARB). In the past, electric vehicles (such as General Motors EV1) were charged by inductive couplers. But later it was not recommended, and started to promote conductive car charging. Then, the California Air Resources Board also formulated the SAE J1772-2001 standard in June 2001 as the standard for electric vehicle charging in California.

The 2001 CARB regulations mandated that from 2006 onwards, the J1772-2001 specification must be introduced into the production of electric vehicles. CARB proposed a draft amendment to Title 13 section 1962.2 in 2008, compelling cars to be marketed from 2010 to use the SAE J1772 standard proposed later, and this amendment was passed in 2012.

Many electric vehicle depots after 2000 adopted the SAE J1772-2009 standard, such as the third generation of Chevrolet Volanda and Nissan Leaf, as well as earlier models. This connector has become a standard device in the U.S. market, mainly because there are many charging stations with this type of connector in the U.S. electric vehicle network (U.S. Economic Recovery and Reinvestment Act has subsidies for programs like ChargePoint America, which also has some help).

The European version of the vehicle is also equipped with SAE J1772-2009 connectors, until European car manufacturers decide to use IEC Type 2 "Mennekes" connectors as standard connectors, and all IEC connectors use the same SAE J1772 communication protocol, so car manufacturers can follow the market needs, and vehicles with SAE J1772-2009 connectors or IEC Type 2 connectors are sold. There are also converters for these two types of connectors on the market.

As a professional ev charging equipment manufacturer, AG Electrical's products are developed in accordance with SAE J1772, GB/T20234, IEC 62196 and other mainstream standards, and can be applied to different brands of electric vehicles and charging stations. We are striving to provide you with the latest standard electric vehicle charging equipment.

As one of the most reliable top electric vehicle charging companies, we provide public charging cable, j1772 home charger, ev type 2 charging cable, electric vehicle charging solutions and etc. Contact us to know more.