"American Standard" refers to the ev j1772 standard.SAE j1772 ev is just a general term. It includes four subdivision standards and three different charging interface models. Among them, the AC charging standard and the DC charging standard are divided into level 1 and level 2 specifications, which are mainly different in output power.

Charge coupler compliant USA SAE J1772™ specifications

J1772 ev is designed for AC Level 2 charging standard and backward compatible of AC Level 1, 120V, and 16A.

Onitl Cable Technology Corporates its charging cable business for AG ELECTRICAL EV charging systems globally to offer various products that meet customers' needs. AG ELECTRICAL has the capabilities to provide high-quality EV car charging cable/car charging connectors and ideal custom solutions whether you are planning for an EV charging solutions.

SAE J1772 Type1 Connectors

The sae j1772 type 1 connector/inlet pair is broadly used in the U.S and Japan as the U.S. and Japan do not have three phase power grid. This standard is limited to single-phase and lower power output than Type 2. It also notes that for Type 1, most of the charging cable is permanently fixed to the charging station/pile.

AG ELECTRICAL, as a participant of EV Industry, would like to be the pioneer of EV industry to make the earth a better planet for human beings.

AG ELECTRICAL EV Charging Cable Type1  conforms to SAE J1772

AG ELECTRICAL With the help of experienced cable specialist from Onitl Cable Technology Corp, AG ELECTRICAL has strong confidence on the product line of EV Connectors for Type1 EV Charging Cable from quality perspective.

We have received continuous positive feedback of Type1 EV Charging Cable from our customers. With the vision to future, we would like to be the pioneer of EV industry to make the earth a better planet for humanbeings.As one of the most reliable ev charger companies, we provide best portable ev charger,port j1772, type 1 sae j1772, sae j1772 type 2, type 2 16a, type 2 to j1772 adapter, ev charging products and etc. Contact us to know more about us.

 Mechanical properties

Mechanical life: no-load plug>10000times

Impact of external force: can afford 1m drop and 2T vehicle run over pressure.

Electrical Performance

The rated current: 16A、32A

The rated voltage: 250V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature rise:<50K

Withstand voltage: 2000V

Contact impedance: 0.5mΩMax

Applied Materials

Shell Material: thermoplastics, flame retardant grade UL94-V0

Pin: Copper alloy, silver

Environmental performance

Operating temperature: -30℃~+50℃

 Type 2 to type 1 ev cable  Mode3 Features

Conform to the provisions and requirements of 62196-2 IEC 2010 SHEET 2-lle.

The product assembly conforms to IEC 61851-1 2010 charging mode 3 connection mode B2.

Adopt no screw rveting pressure process, beautiful appearance. Hand-held design conforms to the principle of ergonomics, convenient plug and pull.

Reliable materials, flame retardant, pressure resistance, abrasion resistance, impact resistance, high oil resistance.

Excellent protection performance, IP65 protection level of the plug (working state) high security.

As one of the most reliable ev charger companies, we provide ev charging cable,type 1 type 2 cable, ev cable type 1 to type 2, ev charging cable type 1 to type 2, type 2 to type 1 charging cable adaptor, type 1 to type 2 ev charging cable,electric vehicle charging solutions and etc. Contact us to know more about us.

 Mechanical properties

Mechanical life: no-load plug>10000times

Impact of external force: can afford 1m drop and 2t vehicle run over pressure.

Electrical Performance

The rated current: 16A、32A

The rated voltage: 250V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature rise:<50K

Withstand voltage: 2000V

Contact impedance: 0.5mΩMax

Applied Materials

Shell Material: thermoplastics, flame retardant grade UL94-V0

Pin: Copper alloy, silver

Environmental performance

Operating temperature: -30C-+50C

TYPE2-GBT Charging Mode3 Cable Features

Conform to the provisions and requirements of GB/T 20234.2-2015 & 62196-2 IEC 2010 SHEET 2-lle.

Product assembly meet GB/T 20234.2-2011 Charging Mode3 connection method B2.

Using riveting pressure process with none screw, have a beautiful appearance.Hand-neld design conform to the ergonomic principle,plug conveniently.

Nice appearance, hand design to prevent accidental direct contact with hands.

Excellent protection performance, protection grade achieved IP55 of plug(working condition)High security.

As one of the most reliable ev charger companies, we provide electric car cable, 3 pin to type 2 cable, type 2 ev charger cable, ev charging solutions and etc. Contact us to know more about us.

 Connection Mode of Type 2 charging socket

Riveting Pressure mode

Screw mode

Mechanical Properties of Type 2 charging socket

Mechanical life: no-load plug>10000

Insertion force:<100N

Electrical Performance of Type 2 charging socket

The rated current: 16A,32A

The rated voltage: 250V,440V

Insulation resistance: >1000MΩ(DC500V)  

Pins temperature rise:<50K

Withstand voltage: 2000V

Contact impedance: 0.5mΩMax

Applied Materials of Type 2 charging socket

Shell material: thermoplastics, flame retardant grade UL94V-0

Contact-tube: Copper alloy, silver plating

Seal:Rubber, Silicone

Environmental Performance of Type 2 charging socket

Operating temperature: -30℃~+50℃

Waterproof rate: IP55Type 2 charging socket  Features

Mode 2 charger conforms to the provisions and requirements of IEC62196-2 2016.

Type 2 socket 32a and 16a match with Hela locking device.

Have one or two PTC (PT1000) thermistor (can match with NTC or Temperature control switch).

Our ev socket with beautiful appearance and prevention cap, which can be installed on the left side, the right side or the front of it.

Reliable material, flame retardant, pressure proof, wear-resisting, vimpact resistance, high oil proof.

Excellent protection performance, protection grade achieved IP55 (working condition) .Type 2 EV Charging Socket Applies to Vehicle

This type 2 ev charging socket has wide applications. For Tesla model3, for Tesla Model S, for Tesla Model X, for BAIC EU-Series, for BYD Yuan/S2 EV, for BYD e5, for Chevrolet Volt, for Mia, for Mia Electric Van, for Mitsubishi OUTLANDER PHEV, for Nissan NV200 SE Van, for Nissan leaf, for SAIC Baojun E-Series, for SAIC Roewe Ei5 EV, for BMW 530e/Le, for Renault Zoe, for Hyundai Kona EV, for BMW i3, for BYD Tang PHEV, for Chery eQ EV, for Toyota Prius PHEV,  for Volkswagen e-Golf, for Geely Emgrand EV, for Great Wall Ora R1 EV.

As one of the most reliable ev charger companies, we provide type 2 socket 32a, type 2 plug ev, ev plug type 2, type 2 connector ev, type 2 socket ev,  Type2 EV Charging Socket and etc. Contact us to know more about ev plug types.

 Mechanical Properties

Mechanical life: no-load plug>10000times

Impact of external force: be able to afford 1m drop and 2tons vehicle run over pressure

Insertion and extraction force:<100N

Electrical Performance

Rated current: 16A/20A/32A

Rated voltage: 120V/250V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature rise:<50K

Withstand voltage: 2500V

Contact impedance: 0.5mΩMax

Raw Material

Shell material: thermoplastics, flame retardant grade UL94-0

Plug pin:copper alloy, silver-plate

Environmental Performance

Temperature: -30℃~+50℃

SAE Type 1 Charging Cable Features  

Conform to the provisions and requirements of SAE J1772 Standard-2012, it can charge all EV manufactured in the USA, correctly and effectively with high compatibility.

Using a riveting pressure process with none screw with beautiful appearance. Hand-held design conforms to ergonomic principle,  plug conveniently. The head of pins using insulation design to prevent direct contact with the hand.  The customer is able to install the charger indoors or outdoor, according to actual demand. Firmly locking the charger on the installation backplane can prevent theft.

XLPO for cable insulation prolonging the aging resistance life-span. TPU sheath improves the bending life and wears resistance of the cable. The best material in the market at present conforms to the latest European Union standards.

Special internal waterproof protection performance, protection grade achieved IP55 (working condition). The shell can effectively insulate the water from the body and enhance the safety level even in bad weather or special circumstances.

Adopted double color coating technology, custom color accepted (the regular color orange, blue, green, gray, white)

Keep the laser logo space for customers. Provide OEM/ODM service to help customers expand the market easier.

Application of SAE Type 1 Charging Cable Features

Apply to Vehicle

Tesla model3, Tesla Model S, Tesla Model X, BAIC EU-Series, BYD Yuan/S2 EV, BYD e5, Chevrolet Volt, Mia, Mia Electric Van, Mitsubishi OUTLANDER PHEV, Nissan NV200 SE Van, Nissan leaf, SAIC Baojun E-Series, SAIC Roewe Ei5 EV, BMW 530e/Le, Renault Zoe, Hyundai Kona EV, BMW i3, BYD Tang PHEV, Chery eQ EV, Toyota Prius PHEV, Volkswagen e-Golf, Geely Emgrand EV, Great Wall Ora R1 EV

Application in area

Commercial EV Charging/Workplace EV Charging, Hotels EV Charging, Home/Residential EV Charging, Public EV charging

SAE Type 1 Charging Cable Features Parameter

AG ELECTRICAL EV Charging cable Type2 acquires all safety and production certificates in electrical filed, ISO9001, ISO 14001, OHSAS 18001, SAE J1772-2012

As one of the most reliable top ev charging companies, we provide sae j1772 cable,j1772 replacement connector, j1772 connector for sale, j1772 charging cable, j1772 cable, j1772 connector, ev car charger adapter and etc. Contact us to know more about us.

 Feature

Sturdy and Durable.

Lot ways to install it.

Could be fixed on the wall or any mounted plate.

Advantage

Easy to install, and flexible assembly.

Could be sold separately or Tie-in-sale with our connectors.

Feature of SAE J1772 Dummy Socket

We have two parts of our SAE J1772 Dummy socket, including one mount panel and screws (Screws are provided by customers as there are different types of screws).

It supports out door or in door use. There is no button design on the top of our SAE Dummy socket as the button lock in on the type 1 connector itself. It supports easy plug in/ out as well. Our SAE Dummy socket is also sturdy and durable. There are a lot ways to install it. It could be fixed on the wall or any mounted plate. The advantage of our Dummy Socket is easy to install, and flexible assembly. It could be sold separately or Tie-in-sale with our connectors.

Application of SAE J1772 Dummy socket

SAE Standard dummy socket from AG ELECTRICAL is used for type 1 connectors. It is conforming to SAE J1772 standard, and is universally matching SAE J1772 connectors.The major function of SAE Dummy socket is to organize type 1 connectors and cables in a limited space. It will facilitate 5m, 8m even longer cable organizing.

As one of the most professional ev charger manufacturers, AG ELECTRICAL has high-quality ev charging products for sale. Welcome to contact us if needed.